QA Engineer Jobs in Ranchi - Induspect Indiapvtltd
Job Description
- Here are 7 roles and responsibilities of a QA/QC Engineer in a construction project.
- Every material data sheet of the material to be supplied to the project that has to be read by a quality engineer.
- Especially when the material is about to submit to the Engineer or Consultant, it must have to be reviewed properly because sometimes the properties of material do not comply with the requirement of the specification, then that would probably be rejected and will cause a waste of time and eventually create delays.
- It might even better if you will prepare a comparison sheet before you finally submit the material to the Engineer.
- Read also: The Qualifications of a QA/QC Engineer
- A QA/QC Engineer shall develop a method statement for the particular work on the site.
- He will make sure that it is submitted to the Consultant or Engineer and should be approved prior to starting the job on the site.
- The QA/QC Engineer shall prepare the method statement ahead of schedule for the jobs and consider making a plan for all the method statements preparation and submission.
- When you received the approval or comments on the method statement the quality engineer will review it, any corrective action in the comments shall be immediately complied and eventually revert back for final approval.
- Do not keep the comments on your hand for a long period of time because the construction team cannot proceed the works until method statement is finalized.
- Inspection request shall be submitted to the Engineer for approval of a certain job before you can proceed with the succeeding work.
- You shall make sure that the job to be inspected is completed so that there will be no revisions or rejection of the inspection. The job will be inspected after 24 hours the Inspection Request is submitted so, always be reminded of that matter because the Engineer will not accept any outright request for inspection.
- Read also: 10 Best Job Interview Strategies For Engineers
- You shall make sure that the Inspection and Test Plan is approved before raising an inspection request.
- Related: How to Prepare a good Inspection and Test Plan Part – 1
- You can issue an internal nonconformance report and site observation to the subcontractors and site construction team. Before issuing an NCR to the concern trades make sure you issue first the site observation report, give them at least 72 hours to take action, but before that they should submit the corrective action and if after 72 hours there is no action then you may issue an NCR.
- If you do not want to feel like you are cruel to them you may give verbal instruction or advice and if they will not take urgent action from your advice then you may proceed to issue site observation.
- As a quality engineer make a routine to conduct site surveillance, you may schedule it for your own like every day or every other day.
- You might ask why “site surveillance?” This is to check if the works on site are moving as per drawing, as per material approved, as per method statement and as per quality control procedure.
- And the safety of people doing the works, you have a right to stop them from doing unsafe work, though it is Safety Officers in-charge to do it.
- Read also: A Step-by-step Guide to Quality Control Procedures for Work Inspection Requests
- The quality engineer shall prepare a QA/QC weekly report. You shall state all the activities that you performed in the past week and critical issues that you have noticed.
- The documents submitted and to be submitted shall also be included in your report.
- A monthly report shall be prepared by a quality engineer but, this is just project case basis.
- If you are to be involved in a huge project like billion worth of project, then it’s not you will prepare the monthly report.
- If you enjoyed reading this post, please share with your favorite social network below. You may write your comments in the comment box.
Job Particulars
About Company
|
|
|
Company Profile |
|
Induspect (India) Private Limited |
|
|
|
The document summarises and highlights the profile of Induspect (India)Pvt. Ltd. with key emphasis on Services provided and offered |
|
|
|
Rajneesh Gaur |
|
5/15/2015 |
|
|
|
|
Table of Contents
What regions are we currently serving?. 2
ISO 9001:2008 Certification:. 2
What are our qualifications?. 2
· Bribery and corruption Policy. 3
· Equal Employment Opportunity Policy. 3
· Occupational Health and Safety Policy. 3
Who are we?
Induspect (India) Pvt. Ltd. is a company established to provide inspection and Technical Manpower Supply services to the oil and gas, Mining and manufacturing industry in India and oceanic region.
Our Director has personal experience in inspection and certification with such organisations as Bureau Veritas and Lloyds subsidiaries in Asia. The company recruited team consisting of marketing and inspection staff to assist Induspect in establishing the company as a preferred provider of inspection, testing and certification services in Australian oil and gas industry.
What services do we offer?Induspect (India) Pvt. Ltd. can provide the following specialist services to its clients:
|
· Welding Inspection · Coating/painting inspection · Quality Management Consultancy
|
· Pre-shipment inspection · Electrical equipment inspection · Offshore and onshore equipment inspection · Non-destructive testing witness and review · Piping, vessels, tanks and structural inspection |
What regions are we currently serving?
We through our offices at Vadodara and Gurgaon are currently servicing West and North India markets and we willing to extend it to any location in India and abroad as per client requirements and operational feasibility.
ISO 9001:2008 Certification:Induspect (India) Pvt.Ltd. Is a ISO 9001: 2008 certified company.
We are maintaining all documentation and systems in place to serve our customers promptly and effectively.
We have developed quality policy and adhering strictly to it without taking any deviation.
We underwent stages of Auditing for our quality management system. Our Quality management system is in line with the international standard.
We are continually improving and are proactive in adapting to the requirements of clients in our system to suit the client requirements.
What are our qualifications?Induspect has a pool of inspectors with mostly engineering (Mechanical / Electrical) in respective field of expertise as basic qualification as a general practice or equivalent experience to suffice the qualifications. Please find below summary of Qualifications and certification of our team members for demonstration purposes.
Mechanical inspector:· Bachelor of Engineering- Mechanical
· CSWIP 3.2/ 3.1 Senior/Welding inspector
· Certified Welding Inspector AWS-CWI
· Process Piping Inspector API-570
· Above Ground Storage Tank Inspector API-653
· Above Ground pressure vessel inspector API-510
· In ASNT Level –Ill
o Radiographic Testing (RT)
o Ultrasonic Testing (UT)
o Magnetic Particle Testing (MT)
o Liquid Penetrant Testing (PT)
o Visual Testing (VT)
· Senior Certified Painting Engineer BGAS Grade-I
· Certified Painting Inspector BGAS Grade-2 &3
Electrical Inspector:
· Bachelor of Engineering (Electronics) (1999-2003)
· Advanced Graduate Diploma Certificates in:
o Electrical Installation
o Generator and Installation
o Motor Installation
o Transformer Installation
o Substation Installation
o Programmable Logic Control
Company policies:We have developed and implemented the following major policies in the company (latest copies can be provided on request basis):
· Bribery and corruption Policy
· Quality Policy
· Equal Employment Opportunity Policy
· Occupational Health and Safety Policy
Why Induspect?Our directors are having reach experience in this field and we have pool of experienced Inspectors associated with us. We thrive on the following strengths;
· Professional and experienced team and proactive management.
· Cooperative and flexible team willing to cooperate as per client requirements.
· Proactive and prompt response to enquiries.
· Social skills of our team members making them good members of team.
· Culture of Ethical practices throughout the company.
We value the fact that we need to provide service to the clients to ensure repeat business and strive to make long term relationships with the clients.
Below is a summary of Qualifications for our some team members for demonstration purposes;
Business references;We respect the privacy of our client representatives as well as the confidentiality of our relationship with them. Detail of references can be provided on specific requests.
